Ascend Group GTLT2 - 5. Track by 900 D web based tracking software; 5.1. Enable GPRS; 5.2. Set APN; 5.3. Set IP and Port

GTLT2 USER MANUAL
Page 18 of 21
5. Track by 900D web based tracking software
5.1. Enable GPRS
Send the SMS to the tracker as following format:
Command Remark
Command format:
710**** **** is the default password. Default:0000
For example:
7100000 710 : Command code
0000: password, default 0000
5.2. Set APN
Send the SMS to the tracker as following format
Command Remark
Command format:
Format 1:#803#****#APN##
Format 2:#803#****#APN# APN user name#APN
password ##
**** is the default password. Default:0000
Use format 2 if your APN requires APN user name and
APN password.
For example:
#803#0000#CMNET##
803 : Command code
0000: password, default 0000
CMNET: APN, is gateway to connect internet, Each
country is different, please contact your SIM card provider
for APN name.
5.3.Set IP and Port
Send the SMS to the tracker as following format:
Command Remark
Command format:
#804#****#IP#port## **** is the default password. Default:0000
For example:
#804#0000#58.64.205.22#8886## 804 : Command code
0000: password, default 0000
58.64.205.22 800D Platform server IP
8886 800D Platform server software Port
5.4.Upload data in preset time when car moving(ACC ON)
Send the SMS to the tracker as following format:
Command Remark
Command format:
#805#****#T#N##
**** is the default password. Default:0000
(1) T= Record location by interval, from 10 to 65535 in
the unit of second.
(2)N= Upload Record Location Quantity Per Time, from
1-50.
(3)Upload location data interval=T*N
N=0, close upload data by preset interval, the gps tracker
will reply ”GPRS Timer Stop”
For example:
#805#0000#30#1##
805 : Command code
0000: password, default 0000
In this example: GTLT2 will send location every 30