GTLT2 USER MANUAL
Page 15 of 21
If the location is invalid during 50 seconds, the gps tracker will reply:ERROR GPS DATA, TRY AGAIN LATER
(3) If the decimal point of Rzzz.z is 0, you cannot omit the 0. For example,radius is 1KM, you need to send 0050000R1.0
Turn on/off Single geo-fence alarm
(Default:OFF)
211****
210****
2110000
2100000
Remarks:The default geo fence is Turn on
(1) 211****: Turn on single geo-fence alarm
When the GPS tracker is in/out of the preset square, GTLT2 will send sms alert and location coordinates to the first authorize phone number,
Meanwhile, GTLT2 will call the first authorized phone number first; if failed, then call the second authorized phone number; if failed once again, then
call the third authorized phone number.
(2) 210****: Turn off single geo-fence alarm
Set multiple geo-fence alarm
006****GX,Y,E/W+Longitude
Left+N/S+Latitude Upper, E/W
Longitude Right+N/S Latitude lower
0060000G1,IO,E114.10004N22.55705,E115.10006N23.557
06
Remarks:(1)
X=1-16
X is the geo-fence number, you can set 16pcs geo-fence total.
(2)
Y=I/O/IO, default is IO
I means geo-fence in alarm; O means geo-fence out alarm; IO means geo-fence in and geo-fence out alarm
(3) E represents East Longitude, W represents West Longitude; N Represents North Latitude, S Represents South Latitude
(4)The command is always valid if you restart,turn on/off the gps tracker
(5)
The command is not valid if you reset to factory
(6) The GPS tracker will send sms to the first authorized phone number if it’s in or out of the preset area
Turn on multiple geo-fence alarm
311****
311****GX
3110000
3110000G5
Remarks:(1)
311****: the command to open all geo-fence alarm
(2)
311****GX, the command to open one of the geo-fence alarm
X=1-16
Turn off multiple geo-fence alarm
310****
3100000GX
3100000
3100000G5
Remarks:(1)
310****: the command to close all geo-fence alarm
(2)
310****GX, the command to close one of the geo-fence alarm
X=1-16
Turn on/off GPS Module (Default:ON)
222****
333****
2220000
3330000
Remarks: (1) 222****: Turn on GPS module
(2) 333****: Turn off GPS module
Request the current all number and
password
*GTAN# *GTAN#
Remarks: Received this command , GPS Tracker will via SMS return the current all number and password.
SMS format:U1:Number1
U2:Number2
U3:Number3
To Next Page
Loading...