GTLT2 USER MANUAL
Page 16 of 21
UP:0000 (GPS Tracker user Password)
SC:,0000 (SMS platform Number,Password)
Read All Parameters
*RCONF# *RCONF#
Remarks: This is the command to read all the present parameters including sms/gprs mode,interval,ip,port.etc.
Information explain:
IMEI: (IMEI Number)
MOD: SMS P2P(SMS mode) /SMS SC(SMS platform mode)/GPRS(GPRS mode)
GPS: ON/OFF(GPS module Turn on/off)/AUTO(GPS module working on Power down mode)
HFR: ON/OFF(Hands-free)
MTPRF: SILENT(Voice Monitoring Turn on)/NORMAL(Voice Monitoring Turn off)
BS: 1(The number of returned base station)
GEO-FENCE=ON/OFF - 000.00000,(Longitude directions.Longitude value)-00.00000(Latitude direction.Latitude value)
R0.0(radius)
GEO-FENCE STATE:RS(geo-fence in alarm)/OS(geo-fence out alarm)
DEFENCE: ON/OFF(Main Power Cut Alarm Turn on/off)
VOICE: ON/OFF(Alarm SMS Turn on/off)
POWER: OFF(Cut car engine)/ ON(Recover car engine)
RATE: 0(Overspeed alarm KM/H)
ST: 0(Track by Preset Interval on SMS mode)
TN: (Receiving SMS Track by Preset Interval on SMS mode mobile phone Number)
INVALID UPLOAD: ON/OFF(Invalid Location data Upload turn on/off)
UNLIMITED: OFF/ON (OFF: gps tracker only responds to authorized phone number; ON: gps tracker responds to any phone
number)
MILEAGE: 0,OFF (Mileage,Mileage statistics Turn on/off)
MOVE: 0.0(Move alarm radius),ON/OFF(Move alarm turn on/off)
ACC PROMPT: ON/OFF(ACC Switch status prompt turn on/off)
APN: cmnet,,(Access points name)
GU: V500,0000(GPRS user name and GPRS services password)
SRV: 0.0.0.0,0000(Server’s IP address and port)
SAMP: 0,0(Record location by interval, Upload Record Location Quantity Per Time, when car moving(ACC ON))
SAMP2: 0,0(Record location by interval, Upload Record Location Quantity Per Time, when car stops(ACC OFF))
HISTORY: 0(GPRS Upload Interval of History Record)
TIME ZONE: E0(Time Zone)
U1: Number1
U2: Number2
U3: Number3
UP: 0000 (GPS Tracker user Password)
SC: ,0000 (SMS platform Number,Password)
Reset to default settings:
*RESET#****## *RESET#0000##
Remarks:
Return to the default settings after restart GPS tracker.
Restart GPS Tracker
*RESTART#****## *RESTART#0000##
Remarks:Restart GPS Tracker