ASCOM Myco 3 - Quick Settings; Low Battery; True Hot Swap

© 2019 Ascom. All rights reserved. TD93301EN / March 2019 / Ver. A
ascom
© 2019 Ascom. All rights reserved. TD93301EN / March 2019 / Ver. A
ascom
Quick Settings
To see a selection of settings, swipe
down from the top of the screen.
To open the whole Quick Settings
panel, swipe down again.
To turn the setting on / o , tap
the corresponding icon.
The Quick Settings panel can be used to make some fast changes in your Ascom
Myco 3, such as alter the brightness of the screen or put the handset in battery
save mode.
You can open the Quick Settings panel both in unlocked mode and on the lock
screen.
Settings
7
Charging
8
Low Battery
If the battery level is low, charge the battery or change it to a fully charged one as
soon as possible.
-
Low battery icon
-
"Battery is low" notication
A battery level of 5 % or less is
indicated by:
-
Battery alert icon
-
"Battery is low" notication
-
Sound signal from the handset
A battery level of 15 % or less is
indicated by:
True Hot-Swap
Ascom Myco 3 has an easily replaceable battery that can be changed without
powering down the handset or exiting your active apps. With hot-swap
functionality you can continue working and using your apps even when the battery
is being exchanged.
-
When removing the battery, your handset is operational for another 60
seconds.
- If the battery is not replaced within 60 seconds, the handset switches o.