ASCOM Myco 3 - Handset Charging Rack; Micro USB Cable

© 2019 Ascom. All rights reserved. TD93301EN / March 2019 / Ver. A
ascom
© 2019 Ascom. All rights reserved. TD93301EN / March 2019 / Ver. A
ascom
Charging
11
Place the handset in a charging slot. If the handset as been correctly inserted,
the charging screen appears showing the battery charge level and the owner
name.
When the green check mark icon appears on the screen and the LED turns
green, the battery is fully charged.
1
2
Handset Charging Rack
Open the charging port at the bottom of the handset.
Attach the Micro USB cable to the charging port and connect USB Power
supply to a power outlet.
When the LED turns green, the battery is fully charged.
Close the charging port to prevent liquid and dust damage.
Micro USB Cable
2
1
3
4