Description
INSTALLATION GUIDE
tCM - Migration ControllerInstallation Guide (NUMIPCE-H)
2 Description
The controller board (NUMIPCE) is a board that replaces the NIAM (Intelligent Address Module) of a
teleCARE M system. On top of this board a Room Controller NIRC4–H can be mounted. The NUMIPCE-H
board offers 4 dual roombuses (8 in total) with a 24Vdc power supply to the rooms. At the room side,
NUMIPPE-H modules are needed to convert the power supply down to 5.5Vdc.
Packing List:
• 1 Controller board NUMIPCE-H
• 1 Room Controller NIRC4–H
• 4x 6-pin connector for interconnection between the NIRC4–H Room Controller and the NUMIPCE-H
board
If speech is needed in this installation, an NIVP–H speech module is needed.
The 8–pin connectors on the NIAM can be reused for the roombuses on the NUMIPCE-HE board.
2
TD 93526EN / 10 January 2022 / Ver. A
To Next Page
Loading...
