INSTALLATION GUIDE
tCM - Migration ControllerInstallation Guide (NUMIPCE-H)
Installation
3 Installation
The NUMIPCE–H is an printed circuit board with no specific ingress protection. This board is meant to be
mounted in the plastic housing of the NIAM (Intelligent Address Module) of an existing teleCARE M installa-
tion. After mounting and installing of the NUMIPCE-H and the Room Controller (NIRC4) in this plastic
housing, the ingress protection is IP40.
TD 93526EN / 10 January 2022 / Ver. A
3
To Next Page
Loading...