ASCOM NUMIPCE-H - Connections

INSTALLATION GUIDE
tCM - Migration ControllerInstallation Guide (NUMIPCE-H)
Connections
5 Connections
Figure 1. Circuit Board
Legend
(1) 2 pin connector for 24Vdc power supply
(2) 4x 6–pin connector for interconnection of NIRC4 Room Controller and NUMIPCE-H board
(3) 8x 8–pin connectors for roombuses 0a through 3b.
TD 93526EN / 10 January 2022 / Ver. A
5