ASCOM T942C System Installation

TD 90227GB
10 October 2013 / Ver. D
System Installation
Ascom Paging System
11
Note: These solutions will attenuates the signal from a Transceiver/Transmitter handset.
Therefore an attenuator has to be used when making range tests. See specifications for
the used filters for more information about the level of attenuation.
To ensure that the paging does not interfere with the fixed receiver, enable the test paging
function in the Central Unit during test.

ASCOM T942C Specifications

General

Brand	ASCOM
Model	T942C
Category	Transmitter
Language	English