ascon ACK 20E - Page 66

64
ACK-E-2009 Engineering & Physical Data
Component Data - Cooling Only (R410A)
MODEL
INDOOR UNIT A5CK 50E
OUTDOOR UNIT A5LC 50C
INDOOR FAN
TYPE BLOWER WHEEL
QUANTITY 1
MATERIAL ASG 10%
DRIVE DIRECT
DIAMETER
mm/in
462 / 18.18
LENGTH
mm/in
171 / 6.13
INDOOR FAN MOTOR
TYPE INDUCTION
QUANTITY 1
INDEX OF PROTECTION (IP) IP22
OUTDOOR FAN
TYPE PROPELLER
QUANTITY 1
MATERIAL
GLASS REINFORCED ACRYL
STYRENE RESIN
DRIVE DIRECT
DIAMETER
mm/in
609.6 / 24
OUTDOOR FAN
MOTOR
TYPE INDUCTION
QUANTITY 1
INDEX OF PROTECTION (IP) -
COMPRESSOR
TYPE SCROLL
OIL TYPE MOBIL EAL ARCTIC 22CC
OIL AMOUNT
cm
3
/ fl .oz.
1656 / 58.3
INDOOR COIL
TUBE
MATERIAL
SEAMLESS INNER GROOVED COPPER
DIAMETER
mm/in
7 / 0.27
THICKNESS
mm/in
0.24 / 0.01
FIN
MATERIAL ALUMINIUM (SLIT FIN)
THICKNESS
mm/in
0.11 / 0.004
FACE AREA
m
2
/ft
2
0.464 / 4.988
ROW 3
FIN PER INCH 20
OUTDOOR COIL
TUBE
MATERIAL
SEAMLESS INNER GROOVED COPPER
DIAMETER
mm/in
9.52 / 3/8
THICKNESS
mm/in
0.30 / 0.012
FIN
MATERIAL ALUMINIUM (HYDROPHILIC)
THICKNESS
mm/in
0.11 / 0.0043
FACE AREA
m
2
/ft
2
0.36 / 3.95
ROW 2
FIN PER INCH 18
AIR QUALITY FILTER
TYPE WASHABLE SARANET FILTER
QUANTITY
pc
1
SIZE
LENGTH
mm/in
576.0 / 22.7
WIDTH
mm/in
556.0 / 21.9
THICKNESS
mm/in
2 / 0.078
CASING
PANEL
MATERIAL
ABS
FINISHING
N/A
COLOUR
LIGHT GREY
INDOOR UNIT
MATERIAL
HOT DIP GALVANIZED STEEL
FINISHING
WITH PE INSULATION
COLOUR
WITHOUT PAINT
OUTDOOR UNIT
MATERIAL
GALVANIZED MILD STEEL
FINISHING
POLYESTER POWDER
COLOUR
LIGHT GREY
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
07-General data_A.indd 6407-General data_A.indd 64 4/6/2009 11:13:16 AM4/6/2009 11:13:16 AM