To Next Page
C
Courtney HughesAug 2, 2025
How to restart ascon Air Conditioner after power failure?
- FfgarrettAug 2, 2025
If your ascon Air Conditioner unit does not resume operation after a power failure, turn on the unit using the wireless or wired controller.
How to restart ascon Air Conditioner after power failure?
If your ascon Air Conditioner unit does not resume operation after a power failure, turn on the unit using the wireless or wired controller.
Why does the compressor on my ascon Air Conditioner run continuously?
If your ascon Air Conditioner compressor is running continuously, it could be due to a dirty air filter. Try cleaning the air filter. Alternatively, the temperature setting may be too low if you are cooling, in which case you should use a higher temperature setting, or too high if you are heating, so you should select a lower temperature.
Why is there condensation on my ascon ACK 20E Air Conditioner?
If you experience condensation on the front air grille of your ascon Air Conditioner's indoor unit, it is likely due to air humidity after prolonged use. Try increasing the temperature setting and operating the unit at a high fan speed.
General| Brand | ascon |
|---|---|
| Model | ACK 20E |
| Category | Air Conditioner |
| Language | English |
Defines the coding for indoor unit models.
Defines the coding for outdoor unit models.
Lists features and classifications for indoor units.
Lists features and classifications for outdoor units.
Details functions like fan speed, sleep mode, timers, and turbo.
Specifies the allowable temperature and humidity ranges for operation.
Illustrates refrigerant flow for ACK/A5CK and ALC/A5LC model series.
Explains the functions and usage of the controller.
Covers site assessment and physical mounting of the indoor unit.
Details the process of hanging the indoor unit and connecting the drain piping.
Specifies required clearances and location requirements for outdoor units.
Provides guidelines on refrigerant pipe length, bends, sizes, and connection types.
Covers wiring rules and important safety precautions for electrical connections.
Details R410A properties, component checks, and installation guidelines.
Presents sound pressure data and noise criteria curves for models.
Provides general specifications for cooling-only R22 models.
Lists general specifications for R22 heat pump models.
Provides general specifications for cooling-only R410A models.
Lists general specifications for R410A heat pump models.
Details components for R22 cooling-only units.
Lists components for R22 heat pump units.
Details components for R410A cooling-only units.
Lists components for R410A heat pump units.
Lists and details safety devices for MCK-E and M5CK-E series models.
Illustrates how to read and interpolate cooling performance data with examples.
Provides cooling performance data for R22 models.
Lists heating performance data for R22 models.
Provides cooling performance data for R410A models.
Presents heating performance data for R22 and R410A models.
Shows the physical dimensions of the indoor units.
Displays the physical dimensions of the outdoor units.
Lists electrical specifications for R22 cooling units.
Provides electrical specifications for R22 heat pump units.
Lists electrical specifications for R410A cooling units.
Provides electrical specifications for R410A heat pump units.
Details maintenance steps for components and checks after extended shutdown.
Describes servicing procedures specific to ALC outdoor units.
Lists common faults and their possible causes/corrections.
Provides troubleshooting based on pressure readings and flow charts.
Guides troubleshooting for refrigerant circuit and application issues.
Shows the assembly and part numbers for indoor units.
Details assembly and parts for various outdoor unit models.
