B-SOCIAL - USER MANUAL
B-Social Audio Interface-Features
• High-resolution 48kHz converters for high-end audio quality
• Works with your PC or Mac–no setup or drivers required.
• Stereo headphone output
Its inputs and outputs give you total connecting flexibility to mixers,
loudspeakers or headphones. The illuminated Ashdown VU meter gives
you an indication that the unit is powered and also enables you to set
the level of your instrument.
• Instrument input 1
• Passive and Active
• Instrument input 2
• Passive and Active
• The AppTek socket is a 3 band (4 pole) 3.5mm input jack allows you
connect with iPod®/iPhone®/iPad®
All Trademarks mentioned belong to their respective owners and are not affiliated with Ashdown Design &
Marketing®
B-SOCIAL - USER MANUAL
System Requirements/Specifications
The B-Social is PC and Mac-compatible. Therefore, no installation
procedure or drivers are required for the correct functioning of the
B-Social. To work with the B-Social, your computer must fulfill the fol-
lowing minimum requirements:
• PC Intel® or AMD® CPU, 400MHz or higher Minimum 128MB
RAM USB 1.1 interface Windows® 2000, XP.
• MAC® G3, 300MHz or higher Minimum 128MB RAM USB 1.1 inter-
face MAC OS® 9.0.4 or higher, 10.X or higher.
Input 1 IN
Connectors Standard 1/4” jack
Input impedance approx. 470 kΩ
input level 150mV /300mV(Active)
Input 2 IN
Connectors Standard 1/4” jack
Input impedance approx. 470 kΩ
input level 150mV /300mV(Active)
AppTek
4 poles 3.5mm headphones jack
Input impedance approx. 10 kΩ
input level 120mV
output impedance approx. 4.7 kΩ
output level 10mV
LINE OUT
Output impedance approx. 680 Ω
output level 25mV
PHONES OUT
3 poles 3.5mm headphones jack
Output impedance approx. 5 Ω
output level 600mV
DIGITAL PROCESSING
Converter 16-bit converter
Sampling rate 32kHz, 44.1kHz, 48kHz
SYSTEM DATA
Frequency response
10 Hz to 20 kHz, ± 1 dB @ 44.1 kHz sample rate
10 Hz to 22 kHz, ± 1 dB @ 48.0 kHz sample rate
THD 0.1% typ. @ -10 dBu, 1kHz
Crosstalk -65 dB @ 0 dBu, 1 kHz
USB 2.0
Connectors type MICRO (Cable included)
Technical specifications and appearance subject to change without notice. The information
contained herein is correct at the time of printing.
To Next Page