—03—
Two people are required to set up the foundation.
WARNING: It is important that you read and carefully follow all foundation assembly instructions. Do not plug the power
cord into an electrical outlet until all assembly has been properly completed. Failure to follow all foundation assembly
instructions may cause the bed to operate improperly possibly resulting in the risk of personal injury or death.
Installat ion Guide
Customer Service Toll Free: 1-800-248-5988
1
Open the box lid.
2
Take out all the accessories from the packaging and put them aside.
All electronics and components
that need to be installed are
located in boxes under the foundation or attached to the frame.
Before
discarding the packing materials, ensure that all the parts
are accounted for.
×1(2 for K/CK)
Mattress Retainer Bar
×1
Accessories Box
Mounting
Bracket
×2 ×2
Motion
Sensor
ACCESSORIES BOX:
×1
AC
Power Cord
×1
Remote
Control
×1
Power Supply with
Battery Backup Box
9V
9V
9V
(Optional)
×3
AAA
Batteries
AAA
×1
Sync Cord
（TXL/T/CKS Only）
×6
Adjustable
Legs
HEADBOARD
3
Install 4 legs, make sure the
legs are tight.
HEADBOARD
To Next Page
