USER GUIDE XGA LCD PROJECTOR
43
15 CONNECTORS
The connector ports for the source equipment on the projector are located
on the right hand-side (when facing) of the unit. The pinouts of all the
connector ports is described in this section.
Do not connect any devices or cables other than those
supplied with the projector into the connector ports on the
projector unit, even if the connector ports appear identical,
as this voids any warranty and may cause permanent
damage to the projector.
15.1 SOURCE 1 & 2
This connector relays all signals from the computer to the projector, and
also back to a local CRT monitor if required.