8
Emptying and cleaning the fat collector
The fan is fitted with a fat collector that collects fat
from the fan blades and fan housing.
1. Remove the grease filter and the charcoal
filter (if fitted).
2. Remove the fat collector and clean it in warm
water with washing up liquid. It can also be
cleaned in a dishwasher.
Replacing the bulbs
Replace the bulbs as follows:
1. Lift up and remove the light fitting with a
screwdriver or other suitable tool.
2. Remove the blown halogen bulb (if the fan
has 4 bulbs = 10W, 2 bulbs = 20W). Remem-
ber that the bulb can be hot!
3. Insert the new halogen bulb.
If you touch the halogen bulb with your bare
hands this may reduce its service life. Always use a
glove or a cloth to avoid direct contact.
NB:
The light is only meant for use during cooking and
not for illuminating the surroundings for longer
periods. If the light is used for longer periods, this
will considerably shorten the burn time of the
bulbs.
CARE AND CLEANING
To Next Page
Loading...
Need help?
General
