15
Special settings
Buzzer volume
If you wish, the machine will emit a buzzer
signal to let you know when it is finished.
Adjust the volume with the Set button. Se-
lect from 1, 2, 3, 4, 5, 6, 7, 8, 9 and 0 = Off.
Continue with the Menu button to make fur-
ther adjustments or press Start/Stop.
Water hardness (machine with
water softener)
Phone your local water board to check the
water hardness in your area. The machine
is set for low water
hardness on delivery.
Set the desired hard-
ness with the Set but-
ton. Select from 1, 2, 3,
4, 5, 6, 7, 8, 9 and 0 =
without water softener
as well as machines
with water softener and
low hardness.
Continue with the
Menu button to make
further adjustments or
press Start/Stop.
Temperature
Using the Set button, choose if the tempera-
ture is to be displayed in °C or °F. Continue
with the Menu button to make further adjust-
ments or press Start/Stop.
No. ˚dH ˚fH
0
0-5 0-9
1
6-8 9-14
2
9-11 15-20
3
12-14 21-25
4
15-19 26-34
5
20-24 35-43
6
25-29 44-52
7
30-39 53-70
8
40-49 71-88
9
50+
89+
Language, Child lock, Buzzer
volume, Water hardness,
Temperature, Machine
information, Reset machine to the
original settings
You will probably only need to adjust these
settings when the machine is new or if you
intend to adapt programs.
To get to the Special settings
1. When you have selected the program and
any option, press the Menu button until
‘Special settings’ appears in the display.
2. Press the Set button and you will now be
in special settings.
3. Press the Menu button until the desired
setting appears in the display.
Language
Using the Set button, select the language
you wish to use. Continue using the Menu
button and adjust other settings if required,
or press Start/stop if you want to start the
machine.
Child lock
Select ‘On’ with the Set button to activate
the child lock. Continue with the Menu but-
ton to make further adjustments or press
Start/Stop.
To temporarily deactivate the child lock
when starting the machine, press Set and
the Menu buttons simultaneously.
The child lock comes back on automatically
after three minutes.
To Next Page
Loading...
Need help?
General
