EasyManua.ls Logo

Asko OP8621S - Oven Cleaning Methods

Asko OP8621S
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
418670
Oven
1. Automatic self-cleaning program – PYROLYSIS
The PYROLYSIS program allows automatic cleaning of the oven
interior by employing high temperature that causes the grease
stains and other impurities to incinerate and thus reduces them
to ashes.
During the self-cleaning cycle, oven lighting is turned off. During
pyrolitic cleaning, unpleasant odors may be emitted from the
oven.
During the self-cleaning process, the oven gets very
hot, even on the outside. Do not allow the children near
the oven!
Never hang ammable objects, such as cloths, on the
oven door handle. Danger of re!
Before starting the self-cleaning cycle, wipe the oven
and the utensils and accessories to be cleaned by
pyrolysis with a damp cloth. Pieces of food, grease,
and juices from the roast may ignite during the self-
cleaning process. Danger of re!
Before activating the automatic cleaning program,
remove the grid, grease lter, spit roasting set, glass
baking trays, meat probe, and any other cookware that
is not a part of the oven equipment.
Use the sensor key
(R) (Figure 1) to activate the pyrolitic self-
cleaning program.
When the function is selected, cleaning time will be automatically
set to the medium cleaning level P2. Symbol (P2) (Figure 2) will
be indicated on the temperature display (I), and the relevant self-
cleaning program duration 2.00 (Figure 3) will be indicated on the
time display (D).
The following three cleaning levels are available, depending on
your requirements:
Level Cleaning intensity Duration
P1 Basic Approximately 90 minutes
P2 Medium Approximately 120 minutes
P3 High Approximately 150 minutes
To change the cleaning intensity level, press the temperature
display (I) where the currently selected cleaning level (P2) is
indicated (Figure 2). Then, use the value set keys (H) to choose
from levels P1, P2, and P3 (Figure 4). The indication of the
self-cleaning duration is changed accordingly; cleaning duration
cannot be changed manually.
Cleaning
Figure 1
Figure 2
Figure 3
Figure 4
36

Table of Contents

Related product manuals