Asko OP8640 - Troubleshooting

22
Troubleshooting
What if…
IF YOU REALIZE
THAT
POSSIBLE CAUSES WHAT SHOULD YOU DO?
The oven isn't heating.
• The oven isn't connected to the
power supply.
• The fuse has blown.
• The temperature selected is too low.
- Connect to power supply.
- Change the fuse, checking that it is
16A.
- Increase the temperature selected.
The lock symbol is
flashing on and off.
• The door lock is faulty. - Contact the After-Sales Service.
The light inside the
oven isn't working.
• The lamp is unusable.
• The oven isn't connected to the
power supply or the fuse has blown.
- Change the bulb.
- Connect to power supply or change
fuse.
Cleaning by pyrolysis
has not occurred.
• The door is not shut properly.
• The door-locking system is faulty.
• The temperature sensor is faulty.
• The plate that detects when the door
is shut is faulty.
- Check the door is properly closed
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
Your oven makes a
beeping noise
• During cooking.
• When cooking is complete.
- The temperature of your choice has
been reached.
- Your programmed cooking cycle is
complete.
Your oven is displaying
a .
• When you press the buttons.
• The cooker controls are locked (child
safety).
- Normal operation.
- To stop this, press on the button and
choose "Unlock".