Minute minder setting
The minute minder can be used independently of oven operation. The
longest possible setting is 24 hours. During the last minute, the minute
minder is displayed in seconds.
Rotate the KNOB to select the symbol and confirm your setting.
Rotate the KNOB and set the minute minder duration. Confirm the setting
by pressing on the KNOB.
INFORMATION!
The select timer function can be reset to 00:00 by long-pressing the KNOB.
INFORMATION!
The most recently used timer function values can be stored and offered as preset values the next
time you use the timer. As a factory setting, this function is off, but it can be activated (see chapter
Selecting extra functions, Adaptive function).
STEP PROGRAM
This function allows baking in two steps or stages (two consecutive baking steps are combined in
a single cooking process).
A1 first cooking step STAGE1, (STAGE2)
C program duration/end of program (see chapter "Timer Functions")
E temperature/power
Step:STAGE1
In the mode, set the baking system and temperature. You can also choose the fast preheating
function. Then, set the baking duration for STAGE1 (see chapter Timer Functions). Confirm the
setting by pressing on the KNOB.
INFORMATION!
In STAGE1, you can set the delayed start; however, if you do so, you cannot activate fast
preheating.
Step:STAGE2
Press and hold the key. STAGE2 (second cooking step) will appear on the display unit (the first
one has already been set). Set the baking system, temperature, and duration. Confirm the setting
by pressing on the KNOB.
If you wish, you can also modify STAGE1 or STAGE2 before starting them.
17
Choosing the settings
To Next Page
Loading...
