11
6 TUMBLE DRY
Step by step instructions to help you achieve
the best drying results.
PUTTING THE WASHING IN
Turn on the main switch first, , then open
the door and put the washing in. Close the
door.
SELECT OPTIONS
By setting the Temperature/Airing knob
and pressing suitable option buttons you
can choose a program to suit your washing.
Options
Quick cooling
You have the possibility of selecting Quick coo-
ling. Normal cooling lasts 18 minutes. Press
the Quick cooling button and cooling will last
9 minutes. This option cannot be selected in
combination with the Anti-crease option.
Buzzer
If you press the Buzzer there will be a three
second acoustic signal when the program is com-
pleted.
Anti-crease
This option will make the drum continue to
rotate three seconds every minute at the end of
the drying program. This option cannot be se-
lected in combination with Quick cooling. This
option prevents garments from lying still and
becoming creased. This is a helpful option if
you cannot take out garments promptly at the
end of the program.
If you have pressed the Buzzer , a bell will
sound each time the drum rotates in this phase,
ie, as a reminder that the drying program has
ended.
SELECT TEMPERATURE
The Temperature/Airing knob will allow
you to choose temperature Normal, ,
or Low,
, or Air fluff program only, .
Use the airing program if you only wish to
shake dust out of garments, air them or soften
them up.
SELECT TIME
Set the desired time for tumble drying or
the Air fluff program with the program
time knob. The program length that you choo-
se depends on what you wish to do with the
fabrics after tumble drying. Dry different times
for different materials to find the right combi-
nation. See also Chapter 7, Consumption valu-
es, for the recommended program times.
In Chapter 12, Quick guide, there is a table
where you can fill in different drying times that
you have found suitable for different fabrics.
NOTE
When using the timed program it is possible to
over-dry fabrics if you set too long a time. This
can cause fabrics to shrink or crease and feel
rough. Synthetic materials can also become char-
ged with static electricity. Find a time that suits
you by choosing a shorter time to begin with.
Also set a shorter time if you tumble dry at
Temperature Normal.
1
2
3
4
To Next Page
Loading...
