12
Tumble drying
5
Selecting Options
By selecting options, you can tailor
a drying programme to suit your
requirements. The available options depend on
the selected programme. Once you have started
the programme, the options you selected
are saved for the next time you use the same
programme. The exception is Delayed Start,
which is not saved for the next time.
Energy Save
1. Select Energy Save by pressing the
programme selector until Energy Save is
highlighted.
2. Turn the programme selector until Energy
Save is displayed.
3. Press the Start button to start the programme
or press the programme selector to choose
more options.
Time saver
You can select Time saver with all programmes
except Revitalise. The programme is shortened
by about 12 minutes.
1. Press the programme selector until Time
saver is highlighted.
2. Turn the programme selector until Time
saver is displayed.
3.Press the Start button to start the programme
or press the programme selector to choose
more options.
Anti crease
This is a useful feature if you cannot take the
washing out as soon as the tumble dryer has
nished. The function prevents the clothes from
remaining in the same position and becoming
creased. The drum will rotate for three seconds
per minute for two hours once the drying
programme has nished
1. Select Anti crease by pressing the
programme selector until Anti crease is
highlighted.
2. Turn the programme selector to select On or
O.
3. Press the Start button to start the programme
or press the programme selector to choose
more options.
Delayed Start
Choose the time you want the programme to
start. This option cannot be selected with the
Timed dry or Revitalise programme.
1. Press the programme selector until Delayed
Start is displayed.
2. Turn the programme selector to set the start
time for the programme.
3. Press the Start button to activate the
programme or press the programme selector
to select more options.
Depending on whether you have set the
clock to 12h display, 24h display or remaining
programme time display, the start time will be
displayed as the actual time or the remaining
time. To change the setting, see the Settings
chapter.
To Next Page
Loading...
