Why my Aspes Dishwasher programme does not start?
If your Aspes Dishwasher isn't starting, there are several things to check. First, make sure the dishwasher is properly plugged in and switched on. Check your indoor fuses. Ensure the water inlet tap is open and the dishwasher door is fully closed. Lastly, inspect the water inlet hose and machine filters to ensure they aren't clogged.
What to do if water remains inside the Aspes AJ14600BD?
If you find water remaining inside your Aspes Dishwasher, start by checking the drain hose to make sure it isn't clogged or twisted; clean or untwist it if needed. Next, clean the filters. If the dishwasher is still running, simply wait until the programme finishes.
How to prevent partial food wastes remaining on the dishes in Aspes Dishwasher?
If your Aspes Dishwasher is leaving food waste on the dishes, make sure you are not overloading the baskets. Place dishes as instructed in the section on loading your dishwasher. Ensure you're using enough detergent, and that you have selected the appropriate wash programme. Clean the holes in the spray arms and check that the drain hose and filters are correctly fitted.
What to do if Aspes AJ14600BD Dishwasher machine stops during washing?
If your Aspes Dishwasher stops mid-cycle, check the mains power supply to ensure there isn't a power failure. Also, verify that the water tap is on, ensuring a consistent water supply.
How to remove whitish stains remains on dishes from Aspes AJ14600BD Dishwasher?
If your Aspes Dishwasher leaves whitish stains on dishes, verify you're using enough detergent. Increase the rinse aid dosage and/or water softener level. If the water hardness level is high, increase the water softener level and add salt. Also, ensure that the salt compartment cap is properly closed.
Why rust stains form on the dishes after using Aspes AJ14600BD?
If you notice rust stains on your dishes after using your Aspes Dishwasher, it could be due to the stainless-steel quality of the dishes; use only dishwasher-proof sets. Adjust the water hardness level using water hardness table if there's a high level of salt in the wash water. Ensure the salt compartment cap is closed properly and use a funnel when filling with salt to avoid spillage. If the issue persists, consult a qualified electrician immediately, as it could be due to a poor mains grounding.
What to do if shaking and hitting noises are heard during a wash operation of Aspes AJ14600BD?
To resolve shaking and hitting noises during an Aspes Dishwasher wash cycle, move or remove any items that are blocking the spray arm in the lower basket.
How to fix dishes that do not dry in Aspes AJ14600BD Dishwasher?
If your Aspes Dishwasher isn't drying dishes properly, select a programme with a drying option. Also, increase the rinse aid dosage setting.
Why detergent remains in the detergent compartment of Aspes AJ14600BD?
If detergent remains in the detergent compartment of your Aspes Dishwasher, ensure the detergent compartment is dry before adding detergent.
What to do in case of water inlet system failure in Aspes Dishwasher?
To address a water inlet system failure in your Aspes Dishwasher, make sure the water inlet tap is open and water is flowing. Separate the inlet hose from the tap and clean the filter of the hose. Contact for service if the error continues.
General| Brand | Aspes |
|---|---|
| Model | AJ14600BD |
| Category | Dishwasher |
| Language | English |
To Next Page
