EasyManua.ls Logo

Aspes AJ14600BD - Cleaning and Maintenance; Filters; Spray Arms

Aspes AJ14600BD
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 27


Cleaning your dishwasher is important to
maintain the machine’s service life
Make sure that the water softening setting
(If available) is done correctly and correct
amount of detergent is used to prevent

compartment when the salt sensor light
comes on.Oil and limescale may build up in
your Dishwasher over time. If this occurs:
Fill the detergent compartment
but do not load any dishes. Select
a programme which runs at high
temperature and run the Dishwasher
empty. If this does not clean your
Dishwasher sufficiently, use a
cleaning agent designed for use with
dishwashers.
To extend the life of your dishwasher,
clean the appliance regularly on each
month
Wipe the door seals regularly with a
damp cloth to remove any accumulated
residue or foreign objects.


once a week. If any food waste remains
or foreign objects on the coarse and

thoroughly with water.
 Micro Filter 
Coarse Filter
 Metal Filter
3 4
1 2

turn it counter clockwise and remove it by
lifting it upwards 
.Then pull and

with lots of water until it is free of residue.

insert, and rotate it clockwise .
Never use your dishwasher without a
filter.
Incorrect fitting of the filter will reduce
the washing effectiveness.
Clean filters are necessary for proper
running of the machine.

Make sure that the spray holes are not
clogged and that no food waste or foreign
object is stuck to the spray arms. If there is
any clogging,remove the spray arms and
clean them under water. To remove the
upper spray arm undo the nut holding it in
position by turning it clockwise and pulling
it downwards. Make sure that the nut is

spray arm.

Related product manuals