EN - 16
•
• Press the Programme button for at least
5 seconds immediately after the machine
is turned on.
• Release the Programme button when
follows water hardness level setting.
Next, the last setting level is displayed.
• Set the level by pushing the programme
button.
•
setting.
•
If the dishes are not drying properly or are
spotted, increase the level. If blue stains
form on your dishes, decrease the level.
1 Rinse-aid not
dispensed
r1 is shown on the
display.
2 1 dose is
dispensed
r2 is shown on the
display.
3 2 doses are
dispensed
r3 is shown on the
display.
4 3 doses are
dispensed
r4 is shown on the
display.
5 4 doses are
dispensed
r5 is shown on the
display.
To Next Page
Loading...
