- 8 - - 9 -
Loading your laundry
The rated washing capacity refers to the largest dry
weight of a load that can be washed.
The thickness, size and type of clothes will influence the
actual capacity.
Do not select more than Water Level “4” for clothes less
than 1.0kg, to avoid splashing of water.
It is recommended that low suds / high efficiency
washing powder is used.
Detergent Usage Guide
How to use bleach /
whitener
Always refer to the
bleach / whitener
instructions prior to
usage.
Fill with water to
desired level.
Dilute the bleach /
whitener in a container.
Pour it slowly into the
washing tub.
Avoid using whitener on
laundry with colour or
patterns as they are
prone to losing colour.
The bleach / whitener
should NOT be applied
directly to laundry.
Adding washing powder
It is suggested to dissolve detergent before adding to the
tub, see as below:
1. Prepare warm water (<35
o
C) in a container.
2. Add washing powder, stirring to dissolve it completely
Adding washing powder Fuzzy Logic programs
Add washing powder / liquid into the detergent box directly
for “Fuzzy logic” programs and “Delay” program.
Adding washing powder Normal Wash.
It is recommended that washing powder/liquid is dissolved
with water and then emptied directly into the washing
machine:
1. Add some water (select the “1” water level).
2. Add washing powder / liquid. Run for about
30 seconds to fully dissolve the detergent. Then
push the “Start / Pause” button to pause the wash
cycle.
3. Load laundry. Select suitable water level. Push the
“Start / Pause” button again to recommence washing
cycle.
If you select “Quick” program, it is recommended to use
liquid detergent instead of washing powder to ensure the
most effective wash results.
Old or poor quality washing powder may cause caking in
the tub or detergent dispenser.
Clean the detergent box periodically to ensure washing
power is evenly distributed and remove any detergent
build up.
Note: For best wash performance, use low suds / high
efficiency washing powder and dissolve the detergent in <1L
warm water prior to mixing with laundry.
CLOSE THE LID
If you open the lid during spin cycle the machine will stop and an audible alarm will
sound.
Operation and Wash Cycles
Indicator display H
Off
On: Indicates the program is about to run and indicates the selected
cycle and options.
Flashing: Indicates the program is running and indicates the selected
cycle and options.
Remaining time display H
Displays “-“ during Fuzzy Logic detection cycle until level is determined.
Displays total time remaining during current, in progress wash cycle.
Displays remaining time when the “Delay” program is used
(hours).
Displays error codes (see page 15).
A “Cycle” button
Program Recommend
Normal Recommended for mixed fabrics and general clothing items.
Heavy Items that are soiled or items that are heavy / big.
Delicate Delicate items that are machine washable.
Quick Lightly soiled or small laundry loads less than 1.5kg
Memory
This cycle setting remembers the last wash, rinse and spin settings
(Water level will not be remembered as it is determined by fuzzy logic
function).
Synthetic Ideal for synthetic fabrics
Wool Machine washable woollen items
Tub dry Dries the inner and outer tub to avoid the growth of mildew.
To Previous Page
Loading...