EasyManua.ls Logo

Aspire ACTIVE AIR 4 - User Manual

Default Icon
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER MANUAL
ACTIVE AIR 4
ALTERNATING MATTRESS OVERLAY
lifecomfort
lifecomfort
PTM639100
Active Air 4 Alternating
Mattress Overlay - Single

Questions and Answers

  • A
    Alicia ChangAug 7, 2025
    What to do if the low pressure LED light is flashing or the alarm is going off on my Aspire ACTIVE AIR 4 Medical Equipment?
    • S
      sydneyalexanderAug 7, 2025
      If the low pressure LED light is flashing or the alarm is sounding, first ensure the CPR valve is in the CLOSED position. Next, check that all air hoses and tubes are tightly secured. Finally, verify that all coupling connections along the mattress are secured.
  • A
    Adam DelacruzAug 12, 2025
    What to do if my Aspire ACTIVE AIR 4 Medical Equipment pump is on but the mattress will not alternate?
    • B
      bradturnerAug 13, 2025
      If the pump is running, but the mattress isn't alternating, make sure the mattress is inflated properly. Also, check that the ALTERNATING mode is turned ON. If the SERVICE REQUIRED LED is illuminated, contact your Aspire dealer.
  • A
    Anthony SanchezAug 16, 2025
    What to do if my Aspire ACTIVE AIR 4 alarm is sounding?
    • E
      Erin WrightAug 16, 2025
      If the alarm is sounding, press the mute button to allow the system to be verified. If the alarm continues to sound, contact your Aspire dealer.
  • T
    todd42Aug 22, 2025
    What to do if my Aspire Medical Equipment pump is not working?
    • J
      Jodi EspinozaAug 22, 2025
      If the pump isn't working, first check that it's properly connected to the mains power supply. Then, make sure the power switch is in the ON position. If the problem persists, contact your Aspire dealer.
  • W
    William PettyAug 27, 2025
    How to fix bottoming out issue with my Aspire ACTIVE AIR 4 Medical Equipment, when there is no alarm?
    • A
      Anthony TerryAug 27, 2025
      If you're experiencing bottoming out without an alarm, check that the pressure setting is correct for the patient. Adjust the comfort dial according to the patient weight range table. Refer to ‘Low pressure light flashing/alarm is going off’ point above. If the problem continues, contact your Aspire dealer.
  • T
    Tonya BrewerSep 1, 2025
    How to reduce the noise of my Aspire Medical Equipment pump?
    • K
      Katrina MillerSep 1, 2025
      To reduce pump noise, check that the pump is mounted correctly and flat against the FOOT end of the bed. If the noise persists, contact your Aspire dealer.

Aspire ACTIVE AIR 4 Specifications

General IconGeneral
TypeAir Purifier
Child LockYes
TechnologyHEPA filtration, Activated Carbon filtration
Vacuum RangeNot applicable
Collection Bottle CapacityNot applicable
Filter TypeHEPA, Activated Carbon
Filter Life6-12 months
Control TypeTouch Control
TimerYes
Air Quality IndicatorYes
Warranty1 year
Battery TypeNot applicable

Related product manuals