What to do if the Aspire ACTIVE AIR BARI 10 Medical Equipment pump is not working?
If the Aspire Medical Equipment pump isn't working, first ensure it's properly connected to a power source and that the power switch is in the ON position. If the issue continues, it's best to contact your Aspire dealer for further assistance.
What to do if the alarm is sounding on my Aspire ACTIVE AIR BARI 10 Medical Equipment?
If the Aspire Medical Equipment alarm is sounding, press the mute button to allow the system to verify. If the alarm continues after muting, contact your Aspire dealer.
What to do if low pressure LED light is flashing on Aspire Medical Equipment?
If the low pressure LED light is flashing or the alarm is going off on your Aspire Medical Equipment, make sure the CPR valve is in the CLOSED position, the air hoses/tubes are tightly secured, and all coupling connections along the mattress are secure. If the problem continues, contact your Aspire dealer.
What to do if Aspire ACTIVE AIR BARI 10 Medical Equipment has a power failure?
If your Aspire Medical Equipment pump experiences a power failure, check that the pump is connected to the mains power supply and that the power switch is in the ON position. If the problem persists, contact your Aspire dealer.
What to do if Aspire Medical Equipment is bottoming out but no alarm?
If the Aspire Medical Equipment mattress is bottoming out but there's no alarm, check that the pressure setting is correct for the patient. Adjust the comfort dial according to the patient weight range. Also, refer to the troubleshooting steps for a flashing low-pressure light or alarm. If the problem continues, contact your Aspire dealer.
Why is my Aspire ACTIVE AIR BARI 10 pump on but the mattress will not alternate?
If the Aspire Medical Equipment pump is on but the mattress will not alternate, make sure that the mattress is inflated. Also, check that the ALTERNATING mode is turned ON. If the SERVICE REQUIRED LED is illuminated, contact your Aspire dealer.
How to fix a noisy Aspire ACTIVE AIR BARI 10 pump?
If the Aspire Medical Equipment pump is noisy, ensure it is correctly mounted and flat against the FOOT end of the bed. If the noise persists, contact your Aspire dealer.
Appropriate for Bariatric patient care, aiming to reduce pressure injuries and enhance comfort.
Highlights of the mattress system including weight range, cycle types, pump features, and material specifications.
General safety guidelines for operating the mattress replacement and pump, including electrical safety and patient considerations.
Precautions related to electrical safety, including avoiding water and damaged cords.
Guidelines for safe operation, supervision, and maintenance to prevent harm.
Instructions for correctly positioning and securing the mattress replacement onto the bed platform.
Instructions on setting the CPR valve and placing the pump unit at the foot end of the bed.
Procedure for connecting the air hose and sensor cable to the pump unit.
Steps for connecting power to the pump and selecting the initial patient mode.
Overview of the digital pump's control panel and its functions.
Steps to turn on the pump and how to enable/disable the function lock feature.
How to use Auto Firm and select pressure modes like Static, Alternating, and Pulsate.
Details on 2-in-1, 4-in-1 alternating modes and the Pulsate mode for breathing exercises.
How to adjust pressure and use the patient weight guide for optimal settings.
Functionality of Auto Protect and activation of Bariatric Mode for heavier patients.
Instructions for turning modes and how to mute pump alarms.
Explanation of Low Pressure, Power Failure, and Service Required indicators and alarms.
Procedure for quick deflation of the mattress in case of a CPR emergency.
Technical specifications for the pump unit and mattress replacements across different sizes.
Instructions for cleaning the pump unit and the mattress cover, including washing and drying.
Routine checks, fuse, and air filter replacement procedures for the pump.
Steps for safely releasing air and storing the mattress replacement.
Troubleshooting steps for pump connection, operation, and alternating problems.
Addressing alarms, noisy pump, bottoming out, and interpreting warning codes.
Information on warranty coverage for defects and consumer rights.
Details for servicing, preventative maintenance, and general inquiries about Aidacare products.
The Aspire Lifecomfort Active Air BARI 10 Alternating Mattress Replacement is an electrically operated mattress system designed for the prevention and relief of pressure injuries, particularly for bariatric adult patients at high to very high risk. It aims to optimize patient comfort and enhance healing through alternating therapy. This product is suitable for various environments, including home care, aged care, and hospitals.
The system comprises a digital mattress pump and a mattress replacement. The pump features digital pressure adjustment, multiple mode selections, patient turning capabilities, and audiovisual alarms. The mattress itself consists of 20 alternating air cells and is covered with a multi-stretch, vapor-permeable fabric. It operates on the principle of alternating air pressure to redistribute pressure, reduce friction and shear, and optimize skin microclimate.
The product comes with a 1-year warranty for the mattress replacement and a 2-year warranty for the pump. Proof of purchase is required for warranty commencement. Aidacare provides customer service and support for all warranty and servicing needs.
General| Brand | Aspire |
|---|---|
| Model | ACTIVE AIR BARI 10 Series |
| Category | Medical Equipment |
| Language | English |
To Next Page
