ASROCK 970M Pro3 - Spread Spectrum; Dram Timing Coniguration

44
English
Spread Spectrum
is item should always be [Auto] for better system stability.
CPU Active Core Control
is allows you to adjust CPU Active Core Control feature. e conguration options
depend on the CPU core you adopt. e default value is [Disabled].
AMD Turbo Core Technology
is item appears only when the processor you adopt supports this feature. Use this
to select enable or disable AMD Turbo Core Technology. Conguration options:
[Enabled] and [Disabled]. e default value is [Enabled].
AMD Application Power Management
Application Power Management (APM) ensures that average power con-sumption
over a thermally signicant time period remains at or below the TDP for the CPU
mode being used. If [Enabled] is selected, the power consumption is reduced when
overclocking.
Multiplier/Voltage Change
is item is set to [Auto] by default. If it is set to [Manual], you may adjust the value of
Processor Frequency and Processor Voltage. However, it is recommended to keep the
default value for system stability.
HT Bus Speed
is feature allows you selecting Hyper-Transport bus speed. Conguration options:
[200MHz] to [2000MHz].
HT Bus Width
is feature allows you selecting Hyper-Transport bus width. Conguration options: [8
Bit] and [16 Bit].
DRAM Timing Conguration
Load Prole Setting
Select the Intel® Extreme Memory Prole (X.M.P.).
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.