ASROCK 970M Pro3 - 4.6 Hardware Health Event Monitoring Screen

62
English
4.6 Hardware Health Event Monitoring Screen
is section allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, fan
speed and voltage.
CPU Fan 1 Setting
is allows you to set the CPU fan 1 speed. Conguration options: [Full On] and
[Automatic Mode]. e default is value [Full On].
Chassis Fan 1 Setting
is allows you to set the chassis fan 1 speed. Conguration options: [Full On] and
[Automatic Mode]. e default is value [Full On].
Over Temperature Protection
When Over Temperature Protection is enabled, the system automatically shuts
down when the motherboard is overheated.