EasyManua.ls Logo

ASROCK B150M Pro4/Hyper - User Manual

ASROCK B150M Pro4/Hyper
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Version 1.0
Published May 2016
Copyright©2016 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate
ASRock Website: http://www.asrock.com
Question and Answer IconNeed help?

Do you have a question about the ASROCK B150M Pro4/Hyper and is the answer not in the manual?

ASROCK B150M Pro4/Hyper Specifications

General IconGeneral
Form FactorMicro ATX
ChipsetIntel B150
SocketLGA 1151
Memory Slots4 x DIMM
Max Memory64GB
Memory SupportDDR4 2133 MHz
RAID SupportRAID 0, 1, 5, 10
Storage Interface6 x SATA3
USB Ports6 x USB 3.0 (2 Front, 4 Rear) 6 x USB 2.0 (4 Front, 2 Rear)
AudioRealtek ALC892 Audio Codec
Video Outputs1 x DVI-D, 1 x HDMI
PCIe Slots1 x PCIe 3.0 x16, 2 x PCIe 3.0 x1
LANGigabit LAN 10/100/1000 Mb/s

Summary

Motherboard Layout

I;O Panel

Chapter 1 Introduction

1.1 Package Contents

Lists all items included with the motherboard package for user reference.

1.2 Specifications

Details the technical specifications and features of the motherboard.

Chapter 2 Installation

Pre-installation Precautions

Essential safety and handling guidelines before installing motherboard components.

2.1 Installing the CPU

Step-by-step guide for correctly installing the central processing unit onto the motherboard.

2.2 Installing the CPU Fan and Heatsink

Instructions for mounting the CPU cooler and fan assembly to the motherboard.

2.3 Installing Memory Modules (DIMM)

Guide on how to properly insert DDR4 memory modules into the motherboard slots.

2.4 Expansion Slots (PCI and PCI Express Slots)

Information on installing expansion cards into PCI and PCIe slots.

2.5 Jumpers Setup

Explains the function and configuration of various jumpers on the motherboard.

2.6 Onboard Headers and Connectors

Details the purpose and connection of onboard headers and connectors for system components.

2.7 M.2_SSD (NGFF) Module Installation Guide

Step-by-step process for installing M.2 SSD modules into the motherboard.

Enabling USB Ports for Windows 7 Installation

Instructions

Procedures for preparing a Windows 7 installation media with necessary USB 3.0 drivers.

Contact Information

EC-Declaration of Conformity

Related product manuals