ASROCK CML-HDV/M.2 TPM R2.0 User Manual

English
47
CML-HDV/M.2 TPM R2.0
ODT NOM (B1)
Use this to change ODT (CH B1) Auto/Manual settings. e default is [Auto].
ODT PARK (A1)
Congure the memory on die termination resistors' PARK for channel A1.
ODT PARK (B1)
Congure the memory on die termination resistors' PARK for channel B1.
Advanced Setting
ASRock Timing Optimization
Congure the fast path through the MRC.
Realtime Memory Timing
Congure the realtime memory timings.
[Enabled] e system will allow performing realtime memory timing changes aer
MRC_DONE.
Command Tristate
Congure the Command Tristate Support.
Exit On Failure
Congure the Exit On Failure for MRC training steps.
Reset On Training Fail
Reset system if the MRC training fails.
MRC Fast Boot
Enable Memory Fast Boot to skip DRAM memory training for booting faster.
Voltage Conguration
CPU Core/Cache Voltage
Input voltage for the processor by the external voltage refulator.
CPU GT Voltage
Congure the voltage for the integrated GPU.
DRAM Voltage
Use this to congure DRAM Voltage. e default value is [Auto].

ASROCK CML-HDV/M.2 TPM R2.0 Specifications

General

Brand	ASROCK
Model	CML-HDV/M.2 TPM R2.0
Category	Motherboard
Language	English