2.10 SLI
TM
, 3-Way SLI
TM
, 4-Way SLI
TM
and Quad SLI
TM
Operation
Guide
is motherboard supports NVIDIA
®
SLI
TM
, 3-way SLI
TM
, 4-way SLI
TM
and Quad
SLI
TM
(Scalable Link Interface) technology that allows you to install up to four
identical PCI Express x16 graphics cards. Currently, NVIDIA
®
SLI
TM
and Quad
SLI
TM
technology supports Windows
®
7 / 7 64-bit / 8 / 8 64-bit / 8.1 / 8.1 64-bit OS.
*If you install CPU with 28 lanes, 4-Way SLI
TM
is not supported.
2.10.1 Installing Two SLI
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE4 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.
Requirements
1. You should only use identical SLI
TM
-ready graphics cards that are NVIDIA
®
certied.
2. Make sure that your graphics card driver supports NVIDIA
®
SLI
TM
technology. Download
the drivers from the NVIDIA
®
website: www.nvidia.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum power
your system requires. It is recommended to use a NVIDIA
®
certied PSU. Please refer to
the NVIDIA
®
website for details.
To Next Page
Loading...
Need help?
General
