ASROCK PG27FF1A - Connecting the ASRock PG27 FF1 A Monitor; Video and Power Cable Connection Procedures

15
Chapter 5 Connecting the Monitor
1. Turn off your computer.
2. Connect the video cable from the monitor to your computer.
3. Connect the power cord to the monitor power jack. (Figure A)
4. Plug the power cord into the electrical outlet. (Figure B)
5. Turn on the monitor. (Figure C)
6. Power on the computer and the monitor will auto detect the signal source.
7. Plug one end of the DisplayPort/HDMI cable to the monitor’s DisplayPort/HDMI port.
8. Connect the other end of the DisplayPort/HDMI cable to your computer's
DisplayPort/HDMI port.