11
R
TECHNICAL DATA ENGLISH
Operating voltage: 12 - 24 V DC (+15%) STAB.
Current: normal 150 mA
idle 70 mA
max. 750 mA
Relays: max. 0.8 A 30 V DC / AC resist. 20 W
Ambient temperature: -20° - +60°C
Opening delay: Delay is set from the controlling device (e.g. EA470 Control Unit,
card reader etc.)
Bolt throw: 22 mm
Backsets: 25, 35 mm
Forend: 25 mm (EL654)
28 mm (EL655)
Forend for wooden doors
and special profi les: 32 mm
Door clearance: 2 - 5.5 mm (between forend and striker plate)
Monotoring outputs: - security bolt out
- security bolt in
- auxiliary lock locked / open
- door closed / open
Control unit: EA470
Cable: EA216 (6 m), EA226 (10 m)
Max. cable length: 50 m (total), 10 m (stub line)
Striker plate: EA300
803677 fl at strike + 803711 magnet
804811 fl at strike + 803711 magnet
ABLOY ® EL654 / EL655 lock cases and ABLOY® EA470 control unit are ASSA ABLOY
Hi-O Technology™ certifi ed products.
Hi-O Technology™
Hi-O (Highly Intelligent Opening) is a standardized new technology for security and control of
door environments. Hi-O enables interconnectivity - communication capabilities between all
the devices involved in a door environment. All devices have a built-in micro processor and
can communicate with each other over a CAN network. CAN network enables plug-and-play
installation, synchronizes the door operation and monitors door environment.
Hi-O is used to reduce wiring, to increase fl exibility and to simplify retrofi tting with new
devices. Because of its intelligent message transfer Hi-O also increases the security of the
door environment.
Hi-O complies with the CiA Standard „Building Door Control“ DSP416.
To Next Page
Loading...
