Assa Abloy Besam SW100 User Manual (English)

Other manuals for Assa Abloy Besam SW100

Questions and Answers:

A
Amy GravesAug 20, 2025
What to do if my Assa Abloy Besam SW100 doesn't open and the motor doesn't start?
- M
  Melinda JordanAug 20, 2025
  If your Assa Abloy Garage Door Opener motor doesn't start, several factors could be at play. First, verify that the control switch isn't set to OFF; if it is, change the setting. Next, confirm that the opener is receiving mains power by checking the mains power switch. If the activation unit isn't functioning, strap the impulse inputs. Also, ensure that presence detection isn't activated by checking for obstructions in the detection zone. Deactivate the kill switch, if it's activated. Lastly, ensure the potentiometer SPTE is turned to 0°.
A
Andrew SanchezAug 22, 2025
Why won't my Assa Abloy Besam SW100 Garage Door Opener close?
- L
  Lindsay RobertsAug 22, 2025
  If your Assa Abloy Garage Door Opener won't close, there are a few potential reasons. Check that the control switch isn't set to HOLD; if it is, change the setting. Make sure that the presence impulse isn't activated by removing any objects in the detection zone. Finally, ensure nothing is jammed beneath the door; if something is, remove it.
M
millerchristopherAug 25, 2025
What to do if my Assa Abloy Garage Door Opener motor starts but the door doesn't open?
- R
  Ryan GrantAug 25, 2025
  If the motor in your Assa Abloy Garage Door Opener starts but the door remains closed, consider these possibilities: The mechanical lock might be engaged, so unlock it. An object might be obstructing the door's path, so remove it. The electric striking plate could be binding, so select lock release. If the arm system has come loose, turn the potentiometer SPTE until the door-stop hits the stop-block, put the door in the required open position, tighten the arm system, and then turn SPTE to 0°.
A
amyhowellAug 26, 2025
What does eight 0.3 s flashes mean on my Assa Abloy Besam SW100 Garage Door Opener?
- M
  Mrs. Patricia Roberts DDSAug 26, 2025
  Eight 0.3 s flashes on your Assa Abloy Garage Door Opener indicates that the motor overheated. Wait for the motor to cool down.
H
Henry BanksAug 27, 2025
What does four 0.3 s flashes mean on my Assa Abloy Garage Door Opener?
- B
  Bradley HuertaAug 27, 2025
  Four 0.3 s flashes on your Assa Abloy Garage Door Opener indicates an encoder error. Check the encoder cable. Open and close the door manually and thereafter check the automatic function. If the operator is still out of function replace the drive unit.
M
Margaret WilliamsAug 29, 2025
What does five 0.3 s flashes mean on my Assa Abloy Garage Door Opener?
- V
  vmillerAug 29, 2025
  Five 0.3 s flashes on your Assa Abloy Garage Door Opener indicates a defective locking device. Check for a short circuit in the locking device. You may need to replace the locking device or the EXU-SI board.
J
Johnny HickmanAug 31, 2025
What does three 0.3 s flashes mean on my Assa Abloy Garage Door Opener?
- M
  Micheal SmallSep 1, 2025
  Three 0.3 s flashes on your Assa Abloy Garage Door Opener indicates a defective control unit. Replace the control unit.
H
Heather Marquez DDSSep 2, 2025
What does two 0.3 s flashes mean on my Assa Abloy Besam SW100 Garage Door Opener?
- B
  Brandon OwensSep 2, 2025
  Two 0.3 s flashes on your Assa Abloy Garage Door Opener indicates a defective battery. Replace the battery, especially if you're operating with mains power.
K
karen92Sep 4, 2025
What does one 0.3 s flash mean on my Assa Abloy Garage Door Opener?
- J
  jeff23Sep 4, 2025
  One 0.3 s flash on your Assa Abloy Garage Door Opener indicates a +24 V DC external error or sensor monitoring error. Check for a short circuit or broken monitored sensor.
J
Justin EdwardsSep 6, 2025
What does nine 0.3 s flashes mean on my Assa Abloy Besam SW100?
- C
  Christina TaylorSep 6, 2025
  Nine 0.3 s flashes on your Assa Abloy Garage Door Opener indicates a blocked door and constant impulse. Toggle the impulse.