80-9360-1027-020 Rev 5 01/23
6021/6031 Series
(Push Side) Power Operator
Installation Instructions
Copyright © 2019, 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
1/4-20
#7
#2 and #3
10" or 12"
3/8
Punch
Set (Inch)
Safety Glasses
Ratchet
with 11/16"
socket
(required for
6031 model)
6031 Push Side (Handed) 110° to 180° opening
All components above with 6030-1W main arm and rod
instead of 6020-1W
Tools Needed
6021 Push Side up to 110° opening
Supplied Fasteners
NOTE: Fasteners shown are for this
asteners for other
installations are included in package)
2X
Union Spacer
#6-32 x 1/4"
2X
Union Door
#4-40 x 3/8"
2X
Backplate
1/4-20 x 1"
6X
Backplate
1/4-20 x 5/
OR
8X
Operator LAP
1/4-20 x 1/2"
1X
Arm
1/4-20 x 1/2"
2X
Adjusting Tube
& Shoe
1/4-20 x 2"
13X
ower Module Sub-assembly
Conduit Assembly
End Caps
Union Assembly
#8-32 x 5/16"
8X
Backplate
#14 x 1-1/2"
Union
Assembly
(6001U)
Union Spacer
(6001US)
Cover
(6001COV)
Adjusting Tube
and Shoe
(6620-12)
End Cap - RH
(6001ENRH)
Closer Assembly
(7500LAP)
Operator LAP
(6021LAP)
Conduit Assembly
(6001CON)
Backplate (6001BP)
Power Module Sub-assembly
(6001PM)
Power Supply
(6000SUP)
Motor
(not field replaceable)
Main Arm and Rod
(6020-1W)
Inverter
(6000IN)
End Cap - LH
(6001ENLH)
Main Arm and Rod
(6030-1W)
This product can expose you to lead which is known to
the state of California to cause cancer and birth defects or
other reproductive harm. For more information go to
www.P65warnings.ca.gov.
WARNING
Pour la version francaise voir NortonRixson.com.
READ AND FOLLOW ALL INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
Approved 2023-01-24
Need help?
General
To Next Page
