Assa Abloy Yale 440F Series User Manual

®
For use with Yale Exit Devices (Wood and Metal Doors)
448F & 449F
Non-Handed
441F & 446F
Non-Handed
440F Series
Exit Device Trim
Installation Instructions
TRIM
441F
446F
448F
449F
FUNCTION
F03 (NL)
F08
Passage
F02
F02
Sectional Lever Trim
LEVER TYPE
Key In
Lever
Plain
Lever
DESCRIPTION
Key retract bolt(s)
Key locks/unlocks lever
Lever retracts bolt(s)
Dummy trim*
Dummy trim
REMARKS
Free wheeling lever
Free wheeling lever
Lever always active
Free wheeling lever
Rigid lever
*Field Prep: Cut tailpiece off, not to engage the device.
All dimensions are in inches (mm) unless otherwise noted.
Attention Installer
Any retrofit or other field modification to a fire rated opening can
potentially impact the fire rating of the opening, and Yale Locks &
Hardware makes no representations or warranties concerning what
such impact may be in any specific situation. When retrofitting any
portion of an existing fire rated opening, or specifying and installing
a new fire-rated opening, please consult with a code specialist or
local code official (Authority Having Jurisdiction) to ensure
compliance with all applicable codes and ratings.
PPHMS
PTHMS
PHILLIPS PAN HEAD MACHINE SCREW
PHILLIPS TRUSS HEAD MACHINE SCREW
FASTENER DESCRIPTION
ABBREVIATION
An ASSA ABLOY Group brand
80-8470-0441-000 (11-18)

Assa Abloy Yale 440F Series Specifications

General

Brand	Assa Abloy
Model	Yale 440F Series
Category	Door locks
Language	English

Summary

Attention Installer

Installation Instructions

General Installation Procedure

Step-by-step guide for mounting the trim, including hole preparation and securing the device.

Tailpiece Sizing

Instructions for adjusting the tailpiece length to ensure proper engagement with the device cam slot.

Standard Cylinder Operations

Lever Handle Removal

Procedure for removing and re-assembling the lever handle using a retaining mechanism.

Interchangeable Core Cylinders

Guidance on using control keys to remove and install different cylinder cores in trim levers.

Adjust Lock for Door Thickness

Steps to adjust the rose plate position for doors of varying thicknesses.

Outside Door Face Trim Template

Door Hole Specifications

Details on hole sizes and locations for metal and wood doors, and template usage caution.