Assemblad Infragas-196 and Infragas-196 PC-Module * Operating manual
ASSEMBLAD S.r.l. - Costruzioni Elettroniche - Via Marzabotto, 4 - 50013 Campi Bisenzio - Firenze - Italy
Tel. +39-055-890485 - Fax +39-055-890496 - E-mail: info@assemblad.it - Web: www.assemblad.it
17
- When oil temperature is over maximum temperature the "or" message (out of
range) is displayed on FUNCTION display, if oil temp. is selected.
- The "or" message may also appear when Lambda are selected on FUNCTION
display. It means that these parameters are out of range (see ranges in Chapter
6).
- When temperature is below 0 °C or above 45 °C the "or" message is displayed on
FUNCTION display if amb. temp. is selected.
- When date / time values are not correct (out of range), date and time are not
printed by the instrument. A date / time setup procedure must be performed.
- The "ON" led on front panel blinks when power supply is out of its range
or IR emitter its broken.
To Next Page
Loading...