Assemblad Infragas-196 and Infragas-196 PC-Module * Operating manual
ASSEMBLAD S.r.l. - Costruzioni Elettroniche - Via Marzabotto, 4 - 50013 Campi Bisenzio - Firenze - Italy
Tel. +39-055-890485 - Fax +39-055-890496 - E-mail: info@assemblad.it - Web: www.assemblad.it
4
1.0 DESCRIPTION
Infragas 196 is a self-calibrating, multifunctional infrared exhaust gas analyzer, with
microprocessor based electronic circuitry.
1.1 GENERAL SPECIFICATIONS
1) CO, CO2 (*) and HC (*) measurements based upon a NDIR method.
2) O2 measurement (*) performed using an electrochemical transducer provided inside
on the rear panel of the instrument.
3) NOx measurement (*) performed using an electrochemical transducer provided
inside on the rear panel of the instrument.
4) RPM measurement (*) performed using the RPM Inductive Probe to be connected
with one of the cylinders and has a 2/4 stroke selection.
5) Ambient Pressure measurement (PRESS mb) based upon a specific pressure
transducer provided inside the instrument.
6) Ambient (AMB °C) and Oil Temperature (OIL °C) measurements performed using 2
separate temperature transducers provided one in the temperature probe (*) and the
other inside the instrument.
7) Lambda computations (*) obtained from gas measurement to test car manufacturer
spec's.
8) Real-Time Clock-Calendar (*) with battery backup allowing a data retention period of
5 days (minimum). A special function is provided to update the Real-Time Clock
[Function not implemented on the model PC-Module ].
9) Automatic Condensate Drainage or automatic stop of gas suction if the condensate
drainage it’s insufficient.
10) Red and Green high-efficiency LED display to improve brightness [ Function not
implemented on the model PC-Module ].
11) Functional 3-keys Membrane Keypad for a good protection against dust and oil. Two
red LED lamps monitor power on (ON) [besides, power on led blinks in case of
voltage
To Next Page
Loading...