Assemblad Infragas-196 and Infragas-196 PC-Module * Operating manual
ASSEMBLAD S.r.l. - Costruzioni Elettroniche - Via Marzabotto, 4 - 50013 Campi Bisenzio - Firenze - Italy
Tel. +39-055-890485 - Fax +39-055-890496 - E-mail: info@assemblad.it - Web: www.assemblad.it
9
Regardless of selection made on FUNCTION display, a printing will include every
measurement performed by the instrument, even if not displaied.
3) P1 key: performs the print out of all measured and / or computed data (both
displayed or not) together with date and time and Workshop data (*) if provided.
Lambda value is relative to different propellant. A CO corr. parameter (corrected CO
value) is also printed (see Chapter 3).
If you need to have another report you must repeat the sequences: MEAS MEAS
and after “Cal” time P1 when the display has a stable appearance.
If the fuel setting is “PEt”, “LPG”, “MEt“, “PEtC”, “LPGC”, “MEtC“, the printing report
action is generated by means of unique key P1 ; if the fuel setting is Unleaded
Gasoline “Cat “ the printing report in generated by two actions on key P1, the first in
correspondence of the engine minimun rate then the second increasing the engine
rate up to 2500-3000 RPM; the second action on the key P1 to end the print report.
PEt = Petrol / Gasoline
MEt = Methane
LPG = Liquefied petroleum gas
PEt C = Unleaded Petrol / Gasoline Catalityc cars
MEt C = Methane Catalityc cars
LPGC = Liquefied petroleum gas Catalityc cars
You can select “PEt”, “LPG”, “MEt“, “PEtC”, “LPGC”, “MEtC“ during the “Cal” time
with FUNC key.
During the “Cal” time you can select the RPM mode 4St or 2St with P1 key in order
to set the right selection of RPM computation mode, referring to the engine type (4-
stroke or 2-stroke).
Pushing twice quickly this key when the analyzer is in standby will activate the
modem, if present, or deactivate it if the analyzer is still online.
4) ON - warning light: When it is flashing you have a problem on power line. Check for
line voltage (Main voltage = 230 Vac -10% +10% max).
5) PUMP - warning light: When this light is on the Pumps are working.
To Next Page
Loading...
Need help?
General