Associated Electrics RC8B3.2e - Introduction; KIT Features; Additional; Other Helpful Items

2
:: Introduction:: Introduction
:: KIT Features:: KIT Features
:: Additional:: Additional
:: Other Helpful Items:: Other Helpful Items
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new Kit. Please take a moment to read through this manual to help familiarize yourself with these steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the
illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.
Check each bag for these sheets before you start to build.
Features in the RC8B3.2e Kit:
• New suspension arm design with inserts for flex adjustments
• Longer rear suspension arm length with narrow rear arm mounts
• New stiff shock bladder design improves jumping and handling performance
• Updated shock cap works for bladder or emulsion style shock setups
• Shorter and lower front bumper reduces drag and allows easier access to anti-roll bar screws
• I.F.M.A.R. approved rear wing
• 42T ring and 12T pinion gears on front and rear differentials for improved gear ratios
• Updated chassis with chamfered front edges to reduce drag
• Side guards are now threaded into the chassis from the top side of the car
• Two-piece sliding motor mount for easy gear mesh adjustment and motor removal
• 90% parts compatibility with RC8B3.1e
Your new RC8B3.2e Kit comes as a kit. There are some items you will need to complete your kit (refer to catalog for suggestions):
• 2 or 3 channel radio/transmitter - /2.4GHz recommended • Transmitter batteries
• 1/8th scale sized motor (#27405, #27406) • 1/8th scale sized ESC (#27007)
• 4s LiPo Battery Pack (#27341, #27342) • Polycarbonate-specific paint
• Steering servo - (#27101, #27115) • Thread-locking compound - (#1596)
• 1:8 scale buggy tires • 1:8 scale buggy wheels • CA (cyanoacrylic) glue - (#1597)
• Needle-nose pliers • Hobby knife • Reamer / hole punch • Ride height gauge
• Silicone Shock/Diff Fluids (Refer to catalog for complete listings) • Body Scissors (AE #1737)
• Shock Pliers - (#1675) • FT Hex Wrenches - (#1518) • FT Hex Wrenches / Nut Drivers - (#1519)
• Reamer / Hole Punch - (#1499) • Wire Cutters • Calipers or a Precision Ruler
• Ride Height Gauge - (#1449) • Turnbuckle Wrench - (#1114) • Wheel Nut Wrench 17mm - (#1571)
• FT 5.0mm Hex Driver - (#1506) • Scissiors - (#1737)
Associated Electrics, Inc.
21062 Bake Parkway.
Lake Forest, CA 92630
www.AssociatedElectrics.com · https://twitter.com/Team_Associated · www.instagram.com/teamassociatedrc/ · www.facebook.com/TeamAssociated/
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501