23
:: Wheels / Tires / Body:: Wheels / Tires / Body - - Misc. Misc. - Step 1- Step 1
89296
RC8 Wheels,
white, 83mm
89297
RC8 Wheels,
yellow, 83mm
Wheels, Tires, and Foam
Inserts Not Included!
!
Tires:
When gluing tires to wheels, use a fast-curing
tire glue (CA) (AE #1597). This is available at
your local hobby shop. Make sure to clean the
mounting surface of the tire and wheel with
alchohol for best adhesion.
#1597
CA tire glue
Build four
wheels/
tires
!
(not included)
:: :: Wheels / Tires / Body - - Misc. Misc. - Step 2
Install wheel nuts with the
serrated edge
towards the wheel.
!
81082
Wheel Nuts,
17mm
(Blue)
x4x4
:: :: Wheels / Tires / BodyWheels / Tires / Body - - Misc. Misc. - Step 3- Step 3
Painting Tips:
Your kit comes with a clear polycarbonate
body. You will need to prep the body before
you can paint it. Wash the inside thoroughly
with warm water and liquid detergent. Dry
the body using a clean, soft, lint-free cloth.
Install the window masks on the inside of the
body. (R/C cars get painted from the inside).
Using high quality masking tape, apply tape
to the inside of the body to create a design.
Spray (either rattle can or airbrush R/C
specific paint) the paint to the inside of the
body (prefferably dark colors first, lighter
colors last).
NOTE: use ONLY paint that is recommended
for use with (polycarbonate) plastics. If you
do not, you can destroy the polycarbonate
body!!!
After painting, cut the body along the trim
lines. Make sure to drill or use a body reamer
to make the holes for the body mounts and
antenna if required!
To Next Page
Loading...
