To Next PageTo Next Page
Need help?Do you have a question about the Associated Research 7700 and is the answer not in the manual?
General| Brand | Associated Research |
|---|---|
| Model | 7700 |
| Category | Measuring Instruments |
| Language | English |
Lists safety and EMC standards the product complies with.
Details on directives, CE mark affixing year, and documentation.
Details of the 2-year, 3-year, and 5-year warranty programs.
Explanation of product marking and caution/warning symbols.
Definitions of terms used in the manual.
General safety precautions and warnings for instrument operation.
Importance and overview of product safety testing.
Explains Dielectric Withstand, Insulation Resistance, and Ground Bond tests.
Instructions for unpacking, inspecting, and handling the instrument.
Guidance on setting up the instrument including work area and connections.
Detailed electrical and functional specifications for the instrument.
Overview of front and rear panel controls and their functions.
Default settings and quick start instructions for basic operation.
Covers key lock settings and memory configuration procedures.
Detailed steps for configuring ACW, DCW, IR, and GND test parameters.
Configuration of system-wide settings like PLC remote and display contrast.
Pre-operation checks and connection procedures.
Procedure for turning on the instrument and initial display.
Description of the settings screen and how to access it.
Procedure for performing a ground continuity test.
Explanation of the Smart GFI circuit for operator protection.
How to review previously executed test results.
Messages displayed during Ground Bond tests.
Messages displayed during AC Withstand tests.
Messages displayed during DC Withstand tests.
Messages displayed during Insulation Resistance tests.
Description of remote signal outputs (PASS, FAIL, PROCESSING).
Control of TEST, RESET, and memory programs via remote signals.
Historical background of the GPIB interface.
Types of messages used for GPIB communication.
Explanation of GPIB device roles (Listener, Talker, Controller).
Description of GPIB signal lines and their functions.
Details on the GPIB connector and its configurations.
Capabilities of devices connected to the GPIB bus.
Setting and managing the unique GPIB address for devices.
Configuration and use of the USB/RS-232 remote interface.
List of commands for controlling the instrument via interface bus.
Explanation of service request capability and status bytes.
Examples of writing commands and reading data over the IEEE bus.
Information on saving parameters to non-volatile memory.
Information on identifying installed options via a rear panel label.
Description of the high resolution IR megohm meter option.
Details on the dual remote test switches option for production lines.
Configuration and use of the printer port for test result printouts.
Features and operation of the enhanced ramping capability.
Steps to enter the calibration mode.
Procedure for setting password and memory lock.
Detailed calibration steps for various test parameters.
