Do you have a question about the Astoria CORE 200 SAE 2 Gr and is the answer not in the manual?
Explains how to read the manual, its structure, updates, and storage.
Defines terms, abbreviations, and symbols used in the manual for clarity.
Details the warranty coverage for machine components.
Covers machine identification, general description, customer service, and intended use.
Provides machine diagrams, push-button panels, and technical specifications.
Introduces the various internal components of the machine.
Outlines safety precautions, required PPE, and procedures for transport and unpacking.
Provides instructions for storing the machine before installation and after use.
Covers essential safety precautions and required personal protective equipment for installation.
Details environmental conditions and site preparation needed for machine installation.
Explains the procedures for making water and electrical connections to the machine.
Covers safety precautions and initial setup steps for bringing the machine online.
Details the commissioning of specific machine functions like cup warming and steaming.
Guides on how to program coffee dose settings for different buttons.
Explains programming for autosteamer temperature and hot water dispensing.
Outlines safety, PPE, and the scheduled maintenance plan.
Details specific maintenance checks for various machine components.
Provides a troubleshooting guide for common machine problems and their resolutions.
Explains how to test water hardness and maintain the filter and softener.
Details daily, weekly, and specific cleaning tasks for the machine.
Provides information on obtaining and using original spare parts.
Guides on how to safely decommission, disassemble, and store the machine.
Covers proper disposal methods and environmental considerations for the machine.
Shows the main electrical connections and the electronic board layout.
Details wiring for connectors, push-buttons, and LED power supply.
Illustrates the specific wiring for the steam system.
Presents hydraulic diagrams for different machine versions (COMPATTA, AEP/2, SAE/2).
| Number of Groups | 2 |
|---|---|
| Group Heads | 2 |
| Boiler Type | Heat Exchanger |
| Boiler | Copper |
| Boiler Capacity | 11 liters |
| Voltage | 220-240 V |
| Width | 700 mm |
| Material | Stainless Steel |
| Type | Espresso Machine |












Loading...