How do I fix 'Comp. Driver Failure' on my Astralpool 78542?
If your Astralpool Heat Pump shows 'Comp. Driver Failure', it could be due to a lack of phase, step, or drive hardware damage. Check the measuring voltage and inspect the frequency conversion board hardware.
What does 'Inverter offline' mean on Astralpool 78542 Heat Pump?
If your Astralpool Heat Pump displays 'Inverter offline', there may be a communication failure between the frequency conversion board and the main board. Check the communication connection to resolve this.
What causes 'Exhaust Air over Temp Prot.' on my Astralpool 78542 Heat Pump?
If your Astralpool Heat Pump is showing 'Exhaust Air over Temp Prot.', the compressor may be overloaded. Check whether the compressor system is running normally.
How to troubleshoot 'Comp. Overcurrent Prot.' on Astralpool Heat Pump?
If your Astralpool Heat Pump displays 'Comp. Overcurrent Prot.', it suggests the compressor is overloaded. Check whether the compressor system is running normally to resolve this.
What to do for 'Anti-freezing Prot' error on Astralpool 78542?
If your Astralpool Heat Pump displays 'Anti-freezing Prot', it indicates that the water flow is not sufficient. To resolve this, check the pipe water flow and ensure the water system is not jammed.
How to fix 'Communication Fault' on my Astralpool 78542?
If your Astralpool Heat Pump displays 'Communication Fault', there may be a communication issue between the wire controller and the mainboard. Check the wire connection between the remote wire controller and the main board to resolve this.
What does 'Low Pressure Prot.' mean on my Astralpool Heat Pump?
If your Astralpool Heat Pump displays 'Low Pressure Prot.', this indicates a low-pressure protection issue. You should check the pressure switch and the cold circuit to resolve this problem.
Why does my Astralpool 78542 display 'High Pressure Prot.'?
If your Astralpool Heat Pump is showing 'High Pressure Prot.', it means the high-pressure switch might be faulty. You should check both the pressure switch and the cold circuit to troubleshoot the issue.
Diagram showing the connection of the heat pump within the filtration circuit.
Guidance on selecting an optimal outdoor location, clearance requirements, and proximity to the pool.
Instructions for connecting the heat pump to the pool's water circulation system using PVC pipe.
Steps for safe electrical connection, initial startup, and noise considerations for the heat pump.
Detailed tables of heating capacity, power input, current, and other operational parameters for various models.
Diagrams and measurements for the physical size of the heat pump units.
Overview of the wire controller's main interface and the function of each button.
Procedures for unit startup/shutdown, mode switching, and target temperature adjustment.
Instructions for setting the current time and configuring the heat pump's timing schedule.
How to activate silent mode, manage timing silent functions, and access fault history.
Display of temperature/power curves and list of adjustable operating parameters.
Tables for electronic and frequency conversion board faults, plus wire control interface definitions.
Guidance on regular checks for water supply, filter cleaning, ventilation, and unit condition.
Important safety precautions and general warnings for unit operation and installation.
Recommended cable types, sizes, and protection for single and three-phase units.
Details on warranty periods, claim procedures, and required documentation.
Conditions that void the warranty and limitations on AstralPool's liability.
General| Brand | Astralpool |
|---|---|
| Model | 78542 |
| Category | Heat Pump |
| Language | English |
To Next Page