To Next PageTo Next Page
Need help?Do you have a question about the Astralpool BLM200 and is the answer not in the manual?
General| Model | BLM200 |
|---|---|
| Category | Heat Pump |
| Heating Capacity | 20 kW |
| Max Water Temperature | 40°C |
| Ambient Temperature Range | 43°C |
Identifies the specific product series and system type.
Describes the content and purpose of the technical manual.
Crucial information for correct installation and operation.
Instructions and recommendations for installing and maintaining the heat pump.
Guidance on identifying and resolving common issues with the heat pump.
Details about the R-407-C refrigerant, its composition, and handling.
Specific instructions for performing maintenance on the heat pump.
Critical safety guidelines to follow during use and operation.
Essential warnings to prevent accidents, fire, or damage.
Environmental and site requirements for proper heat pump installation.
Key specifications, performance data, and operating limits of the heat pump.
Identification and illustration of the main internal parts of the heat pump.
Regulatory requirements and best practices for installing the heat pump.
Instructions for connecting the water pipes to the heat pump.
Guidelines for safely connecting the heat pump to the electrical supply.
Wiring diagrams for different heat pump models.
Specific manual reference for the NA8824 controller.
Explains the symbols displayed on the controller's panel.
Interprets the codes and messages shown on the controller's LED display.
How to adjust and set the desired operating temperature.
Details on accessing and configuring advanced controller settings.
Fundamental concepts behind the controller's operational logic.
How the controller manages heating and cooling based on temperature settings.
Explains the automatic defrost cycle and its activation criteria.
Configuration options for different defrosting modes.
How the controller handles external alarm signals.
Setting and managing a trial period for the controller's operation.
How to set and use a password to protect controller settings.
Key operational steps and environmental conditions for starting the heat pump.
Details on the use and safety of PVC materials in the product.
Information on the properties and safety of titanium components.
General terms and conditions applicable to the product warranty.
Specific conditions related to the warranty coverage.
Exclusions and limitations of the product warranty.
Statement confirming the product's compliance with relevant directives and standards.
