AstroAI True RMS 6000 - Resistance (Auto Ranging); 600 A AC Current through a Clamp (DT3303 Optional); Diode and Continuity

Resistance (Auto Ranging)
Range
Resolution
Accuracy
600Ω
0.1Ω
6KΩ
1Ω
60KΩ
10Ω
600KΩ
100Ω
6MΩ
1KΩ
±(1.5% of rdg + 3dgts)
60MΩ
10KΩ
±(1.5% of rdg + 5dgts)
Open Circuit Voltage: about 0.25V
Overload Protection: 250V DC/AC RMS
600A AC current through a clamp (DT3303 optional)
600A
1mV/10A
±(2.5%+10)
200A
1mV/1A
Diode and Continuity
Range
Introduction
Remark
The approximate forward voltage
drop will be displayed
Open circuit voltage: about 1.5V
The built-in buzzer will sound if
the resistance is less than about
30Ω.
Open circuit voltage: about 0.5V
Overload Protection: 250V DC/AC rms
For continuity test: When the resistance is between 30Ω and 70Ω, the buzzer may sound or
may not sound. When the resistance is more than 70Ω, the buzzer will not sound