AstroAI True RMS 6000 - Electrical Symbols; Specifications Overview

● Clean using a soft cloth and mild detergent for the surface of the Meter. Do not use
abrasive materials or solvents to prevent the surface of the Meter from corrosion and
damage.
● Turn the Meter off when not in use and take out the battery when it is not going to be
used for an extended period of time. Regularly check the battery as it may leak when it
has not been used for some time. Replace the battery as soon as leaking appears. A
leaking battery will damage the Meter.
ELECTRICAL SYMBOLS
∽
AC (Alternating Current)
Low Battery
⎓
DC (Direct Current)
Diode
≂
AC and DC
Fuse
Earth Ground
Continuity Test
Double Insulated
⚠
Warning
AUTO
Auto Range
Dangerous Voltage may be present
Complies with EU directives
SPECIFICATIONS
Digital Display
5 ¾ , 5999
Sampling Speed
2 times per second
LCD Size
64 x 42mm
Range Selection
Auto or Manual
Polarity Indication
Yes
Overload Indication
Yes
Low Battery Indication
Yes