AstroAI True RMS 6000 - Device Controls and Display; LCD Screen Diagram; Select and Hold Buttons

LCD SCREEN DIAGRAM
%
Duty Cycle
℉
Fahrenheit Temperature
℃
Celsius Temperature
hFE
Transistor hFE
Continuity Test
Diode Test
External Current Test (Clamp)
AUTO
Autorange Mode
APO
Automatic Power-Off
Data Hold
MAX
Maximum Reading
MIN
Minimum Reading
DC
AC
Negative Reading
Low Battery, Replace Immediately
Relative Mode
GETTING TO KNOW YOUR DEVICE
Select Button
When using the rotary switch to select a multimeter function, use the Select Button to further
select the function. This applies only to multifunction settings like the temperature and test
functions.
Button
Hold and backlight function button. When taking a measurement, press this button to hold the
data for easier recording. Press the button again to remove the hold function.
Press and hold this button to turn on the backlight on the LCD screen.