1-24 Chapter 1: Hardware information
Never connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
6 . USB connectors (10-1 pin USB78, USB56, USB910)
These connectors are for USB 2.0 ports. Connect the USB/GAME
module cable to any of these connectors, then install the module to a
slot opening at the back of the system chassis. These USB connectors
comply with USB 2.0 specification that supports up to 480 Mbps
connection speed.
NEVER connect a USB cable to the IEEE 1394a connector. Doing so
will damage the motherboard!
7 . IEEE 1394a connector (10-1 pin IE_1394_2)
This connector is for an IEEE 1394a port. Connect the IEEE 1394a
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
A8N-SLI
To Next Page
Loading...
